ელემენტის პლატა მთლიანად გადავიტანე და მივაპაიკე. ხედავდა კაცო მთლიანად. ეგ ამბები ოტიდო წავიკითხე სანამ გავაკეთებდი. თავიდან აურია მაგრამ 3 ციკლის მერე დალაგდა. ბატარეის ვოლტაჟით წერს %-ებს ტელეები ამიტომ სრულად დაინახა 3000-იანი ელემენტი და საქმეც იდეალურად იყო 6 სთ SOT მქონდა მარა ბატარეა გამოდგა ძველი ეტყობა და მაგიტომ დაიბრიდა. ეხლა 38%-ს ანახებს მაგრამ ითიშება უცებ. ზოგჯერ შეიძლება არც ცაირთოს.
ტერიტორიულად რა ადგილას ხარ? წამოვიღებ ამ nexus 5-ს ბატარეას და იმ 3000-იანსაც და ფიზიკურად შევადარებ.
აი მანდვე ახსნა კომენტარებში ამან კარგად და დეტალურად რასაც მე ვამბობ. ვოლტაჟით უყურებს პროცენტებს და ამიტომ თუ გინდა 10 000 mah-იანი ჩააყენე მაინც აღიქვამს სრულად ოღონდ უფრო დიდი ხანი დაიტენება და დიდი ხანი გაძლებს.

Lithium batteries are charged with CC-CV method. Constant-Current, Constant-Voltage.
You start the charge with Constant-Current. Output voltage is X, current is Y.
Continue that until the battery itself reaches voltage X.
Switch to Constant-Voltage mode. Output voltage is still X but your current starts to drop automagically.
Continue CV until you reach your termination current. Usually lithium chargers have a 50mA termination current.
Just because the software sees 3000mAh as "hardwired" or the default value, doesn't mean that the OP3 phone wouldn't charge the larger OP3T battery to full.
What this all means is that the charging circuit doesn't give a flying fuck about mAh's.
It just looks at the voltage of the battery.
This post has been edited by matemana on 16 Feb 2017, 18:04