Agonist პირველი გავაკეთე და ამ ინსტრუქციას ვერ ვხვდები რა უნდა ვქნა?
2. Device not responding to USB, but start responding after battery disconnect (you need to disassemble your phone) as VID:PID = 05c6:f006 = Qualcomm modem mode.
In most cases this mean that you has HARD bricked device. I still could not provide soft way to switch from this mode to QHSUSB_DLOAD mode, so currently with this situation you has only one possibility - is to find pin, which will force device to QHSUSB_DLOAD mode. For droid Ultra (and I believe Maxx) you could find this pin marked on picture attached. On my picture you could see, that I remove shield completely, but you could reach this pin by opening shield cup only. This is the shield near display connector. This pin should be grounded to force QHSUSB_DLOAD mode. Once you see device with VID:PID = 05c6:9008 - STOP shorting pin to ground and follow unbrick 1 procedure.
If you not stopping SHORT ping to gound, you may have issues with uploading images in step 1 !!!
This both unbrick tested on Droid Ultra, but I assume it should work on Droid Maxx as well (I include _maxx folder with files for maxx).
Instruction to generate partitions.txt from working phone (Note you could have different name instead of mmcblk0):
1. adb shell dd if=/dev/block/mmcblk0 of=/sdcard/pt.bin bs=1024 count=10
2. adb pull /sdcard/pt.bin .
3. ./gpt_parser.py pt.bin > partitions.txt
Edit: Split package into 5 packages: 1. Image files for MAXX, 2 Image files for ULTRA, 3. Loader .bin for Motorola_8960 4. Window drivers for QHSUSB_DLOAD mode, 5. qdload.py script
qdload.py script updated to V1.2 with lot of usefull info printed.
move gpt_parser.py script to main post
ჩემის ტელეს ისევ ქუალქომის პროცესორად აღიქვამს
* * *
მინდა რომ როგორღაც ჩავაგდო ფასტბუთ მოდში რომ გადვწერო პროგრამა
* * *
რარაც მწვანე შუქს ანთებს ზემოტ
და ეგრას ნიშნავს?
This post has been edited by vaniko9 on 30 May 2016, 18:48
მიმაგრებული სურათი
მოტოროლა დროიდ მაქსი, ერთი წუთით მჭირდება თქვენი დახმარება
